This PR adds a message for queue mode which triggers an external secrets
provider reload inside the workers if the configuration has changed on
the main instance.
It also refactors some of the message handler code to remove cyclic
dependencies, as well as remove unnecessary duplicate redis clients
inside services (thanks to no more cyclic deps)
Depends on https://github.com/n8n-io/n8n/pull/7220 | Story:
[PAY-840](https://linear.app/n8n/issue/PAY-840/introduce-object-store-service-and-manager-for-binary-data)
This PR introduces an object store service for Enterprise edition. Note
that the service is tested but currently unused - it will be integrated
soon as a binary data manager, and later for execution data.
`amazonaws.com` in the host is temporarily hardcoded until we integrate
the service and test against AWS, Cloudflare and Backblaze, in the next
PR.
This is ready for review - the PR it depends on is approved and waiting
for CI.
---------
Co-authored-by: कारतोफ्फेलस्क्रिप्ट™ <aditya@netroy.in>
all commands sent between main instance and workers need to contain a
server id to prevent senders from reacting to their own messages,
causing loops
this PR makes sure all sent messages contain a sender id by default as
part of constructing a sending redis client.
---------
Co-authored-by: कारतोफ्फेलस्क्रिप्ट™ <aditya@netroy.in>
Depends on: https://github.com/n8n-io/n8n/pull/7195 | Story:
[PAY-837](https://linear.app/n8n/issue/PAY-837/implement-object-store-manager-for-binary-data)
This PR includes `workflowId` in binary data writes so that the S3
manager can support this filepath structure
`/workflows/{workflowId}/executions/{executionId}/binaryData/{binaryFilename}`
to easily delete binary data for workflows. Also all binary data service
and manager methods that take `workflowId` and `executionId` are made
consistent in arg order.
Note: `workflowId` is included in filesystem mode for compatibility with
the common interface, but `workflowId` will remain unused by filesystem
mode until we decide to restructure how this mode stores data.
---------
Co-authored-by: कारतोफ्फेलस्क्रिप्ट™ <aditya@netroy.in>
Story: [PAY-846](https://linear.app/n8n/issue/PAY-846) | Related:
https://github.com/n8n-io/n8n/pull/7225
For the S3 backend for external storage of binary data and execution
data, the `getAsStream` method in the binary data manager interface used
by FS and S3 will need to become async. This is a breaking change for
nodes-base.
Story: https://linear.app/n8n/issue/PAY-839
This is a longstanding bug, fixed now so that the S3 backend for binary
data can use execution IDs as part of the filename.
To reproduce:
1. Set up a workflow with a POST Webhook node that accepts binary data.
2. Activate the workflow and call it sending a binary file, e.g. `curl
-X POST -F "file=@/path/to/binary/file/test.jpg"
http://localhost:5678/webhook/uuid`
3. Check `~/.n8n/binaryData`. The binary data and metadata files will be
missing the execution ID, e.g. `11869055-83c4-4493-876a-9092c4708b9b`
instead of `39011869055-83c4-4493-876a-9092c4708b9b`.
Depends on: #7164 | Story:
[PAY-838](https://linear.app/n8n/issue/PAY-838/introduce-object-store-service-for-binary-data)
This PR removes `storeMetadata` and `getSize` from the binary data
manager interface, as these are specific to filesystem mode. Also this
disambiguates identifiers:
```
binaryDataId
filesystem:289b4aac51e-dac6-4167-b793-6d5c415e2b47 {mode}:{fileId}
fileId - FS
289b4aac51e-dac6-4167-b793-6d5c415e2b47 {executionId}{uuid}
fileId - S3
/workflows/{workflowId}/executions/{executionId}/binary_data/b4aac51e-dac6-4167-b793-6d5c415e2b47
```
Note: The object store changes originally in this PR were extracted out
into the final PR.
---------
Co-authored-by: कारतोफ्फेलस्क्रिप्ट™ <aditya@netroy.in>
Depends on: #7092 | Story:
[PAY-768](https://linear.app/n8n/issue/PAY-768)
This PR:
- Generalizes the `IBinaryDataManager` interface.
- Adjusts `Filesystem.ts` to satisfy the interface.
- Sets up an S3 client stub to be filled in in the next PR.
- Turns `BinaryDataManager` into an injectable service.
- Adjusts the config schema and adds new validators.
Note that the PR looks large but all the main changes are in
`packages/core/src/binaryData`.
Out of scope:
- `BinaryDataManager` (now `BinaryDataService`) and `Filesystem.ts` (now
`fs.client.ts`) were slightly refactored for maintainability, but fully
overhauling them is **not** the focus of this PR, which is meant to
clear the way for the S3 implementation. Future improvements for these
two should include setting up a backwards-compatible dir structure that
makes it easier to locate binary data files to delete, removing
duplication, simplifying cloning methods, using integers for binary data
size instead of `prettyBytes()`, writing tests for existing binary data
logic, etc.
---------
Co-authored-by: कारतोफ्फेलस्क्रिप्ट™ <aditya@netroy.in>
Github issue / Community forum post (link here to close automatically):
---------
Co-authored-by: Omar Ajoue <krynble@gmail.com>
Co-authored-by: कारतोफ्फेलस्क्रिप्ट™ <aditya@netroy.in>
This PR introduces banner framework overhaul:
First version of the banner framework was built to allow multiple
banners to be shown at the same time. Since that proven to be the case
we don't need and it turned out to be pretty messy keeping only one
banner visible in such setup, this PR reworks it so it renders only one
banner at a time, based on [this priority
list](https://www.notion.so/n8n/Banner-stack-60948c4167c743718fde80d6745258d5?pvs=4#6afd052ec8d146a1b0fab8884a19add7)
that is assembled together with our product & design team.
### How to test banner stack:
1. Available banners and their priorities are registered
[here](f9f122d46d/packages/editor-ui/src/components/banners/BannerStack.vue (L14))
2. Banners are pushed to stack using `pushBannerToStack` action, for
example:
```
useUIStore().pushBannerToStack('TRIAL');
```
4. Try pushing different banners to stack and check if only the one with
highest priorities is showing up
### How to test the _Email confirmation_ banner:
1. Comment out [this
line](b80d2e3bec/packages/editor-ui/src/stores/cloudPlan.store.ts (L59)),
so cloud data is always fetched
2. Create an
[override](https://chrome.google.com/webstore/detail/resource-override/pkoacgokdfckfpndoffpifphamojphii)
(URL -> File) that will serve user data that triggers this banner:
- **URL**: `*/rest/cloud/proxy/admin/user/me`
- **File**:
```
{
"confirmed": false,
"id": 1,
"email": "test@test.com",
"username": "test"
}
```
3. Run n8n
Based on #7065 | Story: https://linear.app/n8n/issue/PAY-771
n8n on filesystem mode marks binary data to delete on manual execution
deletion, on unsaved execution completion, and on every execution
pruning cycle. We later prune binary data in a separate cycle via these
marker files, based on the configured TTL. In the context of introducing
an S3 client to manage binary data, the filesystem mode's mark-and-prune
setup is too tightly coupled to the general binary data management
client interface.
This PR...
- Ensures the deletion of an execution causes the deletion of any binary
data associated to it. This does away with the need for binary data TTL
and simplifies the filesystem mode's mark-and-prune setup.
- Refactors all execution deletions (including pruning) to cause soft
deletions, hard-deletes soft-deleted executions based on the existing
pruning config, and adjusts execution endpoints to filter out
soft-deleted executions. This reduces DB load, and keeps binary data
around long enough for users to access it when building workflows with
unsaved executions.
- Moves all execution pruning work from an execution lifecycle hook to
`execution.repository.ts`. This keeps related logic in a single place.
- Removes all marking logic from the binary data manager. This
simplifies the interface that the S3 client will meet.
- Adds basic sanity-check tests to pruning logic and execution deletion.
Out of scope:
- Improving existing pruning logic.
- Improving existing execution repository logic.
- Adjusting dir structure for filesystem mode.
---------
Co-authored-by: कारतोफ्फेलस्क्रिप्ट™ <aditya@netroy.in>
